Full face masks

Full face masks enclose the entire face and thus protect the eyes at the same time. The sealing line runs across the forehead, cheeks and below the chin. Full-face masks are usually equipped with inner masks, which on the one hand keep the mask dead space (reducing the accumulation of used breathing air) low, and on the other hand prevent the viewing windows from fogging up due to the airflow.

Full-face masks are divided into 3 classes according to DIN EN 136, which fulfill the same respiratory protection function (e.g. permissible total leakage), but show significant differences in terms of mechanical strength, resistance to the effects of flames and thermal radiation.Classification:

Class 1: Full face masks for low exposure applications,
Class 2: full face masks for normal applications
Class 3: Full-face masks for special applications with the highest stress.

 

The lowest requirements are placed on full-face masks of Class 1. Here, the requirements regarding the tensile strength of the device connector, the strap and the exhalation valve as well as the flame resistance are significantly reduced. In order to exclude dangerous combinations in operational practice, full-face masks of Class 1 must not be equipped with standardized connection threads according to DIN EN 148 Parts 1 to 3.

Full-face masks of Class 2 differ from those of Class 3 only in that they are less resistant (especially the visor) to thermal radiation. The highest requirements are placed on full-face masks of class 3, which are used e.g. by fire departments as well as mine and gas protection brigades.

Masks of all 3 classes can be fitted with optical vision aids, e.g. mask goggles, for spectacle wearers. Goggles with temples are unsuitable for use under a full-face mask.

Our Partner

3M Vollmaske Serie 6500

3M full face mask 6000 series

The full-face masks of the 6000 series (class 1) are low-maintenance and convince by their easy handling and high wearing comfort. All masks of this series are equipped with the bayonet click connection, this allows the quick and easy change of filters, which you can select from an extensive range according to your application. The 6000 series also features an extensive range of spare parts and is easy to maintain.

• Double filter full face mask
• Safety during use
• Large polycarbonate lenses for a wide field of vision
• Bayonet click system for connection to different filters
• Soft, hypoallergenic elastomer mask
• Easy maintenance for long durability
• wide range of spare parts
• CE approval according to EN 136 class 1

Vollmaske Panarea mit Filter

PM Full face mask Panarea Pro

The new PM full face mask Panarea made of silicone offers a maximum of wearing comfort. Due to the soft and skin-friendly silicone rubber, the mask combines pleasant wearing properties and a long durability. The curved panorama lens offers an unlimited field of vision without restrictions. A scratch-resistant anti-fog lens is installed as standard. To extend the service life of the full-face mask, it has been approved with the Smartblower respiratory protection blower. The blower serves as a breathing support. Thanks to its very small size and light weight, neither the field of vision nor the weight of the mask are affected, which makes the work much easier for the user.

• Double filter full face mask
• Safety during use
• Large polycarbonate lenses for a wide field of vision
• Bayonet click system for connection to different filters
• Soft, hypoallergenic elastomer mask
• Easy maintenance for long durability
• wide range of spare parts
• CE approval according to EN 136 class 1

Vollmaske JSP Force 10

JSP full face mask Force 10

The NEW Force™10 Typhoon™ is an extremely lightweight full face mask with optical quality panoramic visor. The user benefits from an excellent fit and comprehensive protection. The full face mask is compatible with our PressToCheck™ filter system and is available in 3 sizes.

• Available in small, medium or large for a perfect fit.
• Compatible with PressToCheck™ filters (not included).
• Typhoon™ valve for reduced breathing resistance (patent pending).
• Easy maintenance
• One of the lightest full face masks on the market
• CE approval according to EN 136

Vollmaske Scott Promask FM3 mit e-breathe Partikelfilter

Scott full face mask Promask EPDM

Computerized design improves the seal fit as well as the wearing comfort. The mask was given a unique fit, resulting in an excellent mask seal fit. The design of the inner part reduces the CO2 content to a minimum and thus avoids premature fatigue of the user.

• safety during use
• modern design
• panoramic viewing window
• soft sealing lip for comfortable and secure fit
• easy maintenance for long durability
• large selection of spare parts
• CE approval according to EN 136 class 3
approved as breathing connection for blower systems

Scott full face mask Promask silicone

Non-allergenic materials: The mask body is made of a special elastomer ‘Procomp’ that provides optimal user comfort and is resistant to chemicals, high temperatures and wear and tear during daily use. The new small inner mask is made of an anti-allergenic silicone and has been specially selected for its chemical resistance and ease of use. The soft silicone of the inner mask is skin friendly.

• safety during use
• modern design
• panoramic viewing window
• soft sealing lip for comfortable and secure fit
• Made of extremely skin-friendly liquid silicone.
• Uncomplicated handling – easy to adjust and remove.
• Easy to clean.
• CE approval according to EN 136, class 2
Approved as breathing connection for blower systems

Scott full face mask Promask2

Promask² is a double-filter full-face mask that distributes weight extremely advantageously and presents an exceptionally slim shape, making it suitable for work areas that require working at close range or have narrow access.

Promask² is equipped with a very comfortable T-shaped sealing lip that provides an efficient seal with a minimum of pressure on the face. With intelligent airflow control, the inner mask prevents the visor from fogging up and ensures that CO2 is removed quickly and effectively. This minimizes wearer fatigue, even during long working hours.

Promask² is equipped with a large panoramic lens that ensures an optimum field of vision. In addition, the speech membrane built into the front area allows for easy communication with colleagues. The clear inner mask makes the wearer feel less impaired and provides a friendly appearance to others.Promask² is injection molded from gray silicone and is used with the Pro² filter range. The filters are each fitted with a cover that maximizes service life by protecting the filter media from splashes, sparks and contaminants.

• Slim shape
• Clear speech transmission
• Soft, pliable silicone
• Clear inner mask
• Wide range of spare parts
• CE approval according to EN 136 class 3
Not approved as breathing connection for blower systems

Vollmaske Sundström SR 200

Sundström full face mask SR200

This lightweight full face mask is made of silicone, molded directly in one piece, which increases the tightness. The mask is available with two different headgear materials. Low breathing resistance is ensured by two exhalation valves. Another special feature is the visor, which directs part of the exhaled air to the outside, preventing the visor from fogging up.

The SR 200 full face mask is intended for applications requiring the maximum safety and breathing comfort for which our half masks have become so well known. SR 200 is used with the same simple filtering systems and the same compressed air additive as our half masks.

• particularly light: only 450 grams
• suitable for activities with high protection requirements
• Mask body made of silicone
• Available with rubber or fabric strap
Approved as breathing connection for blower systems
• Use with round thread filters
• CE approval according to EN 136:1998

Moldex full face mask series 9000

Series 9000 full-face masks can be easily combined with EasyLock® gas and particle filters, without any adapters or special prefilters. This offers high flexibility and easy storage. A frameless lens made of scratch-resistant, solvent-resistant polycarbonate protects the eyes and provides a wide field of vision. The wide-open strap and two convenient release handles allow easy on and off. The masks are low-maintenance, and replacement of the few spare parts and cleaning are quick and easy. An anatomical sealing lip gives the lightweight full-face masks a comfortable seal. Moldex full-face masks are durable and meet the high requirements of Class 2.

• Double filter full face mask
• Large field of vision
• Scratch resistant, solvent resistant lens
• Mask body made of TPE
• CE approval according to EN 136 class 2
Not approved as breathing connection for blower systems

Moldex full face mask series 9000 RG

Full-face masks can be combined with DIN round thread filters (gas and particle filters). This offers high flexibility and easy stock-keeping. A frameless lens made of scratch-resistant, solvent-resistant polycarbonate protects the eyes and provides a large field of vision. The wide-open strap and two convenient release handles allow easy on and off. The masks are low-maintenance, and replacement of the few spare parts and cleaning are quick and easy. An anatomical sealing lip gives the lightweight full-face masks a comfortable seal. Moldex full-face masks are durable and meet the high requirements of Class 2.

• Use with DIN round thread filters
• Large field of view
• Scratch resistant, solvent resistant lens
• Mask body made of TPE
• CE approval according to EN 136 class 2
• Not approved as breathing connection for blower systems

Dräger full face mask X-Plore 6300

Dräger X-plore 6300 is the high-performance and cost-effective full-face respirator for the price-conscious user who does not want to do without high wearing comfort and proven quality. It is the successor to the Panorama Nova Standard, which has proven itself worldwide for decades. The technical details, features and color scheme have been revised and improved.

• Use with round thread filters
• Use with blower X-Plore 8000 and compressed air unit X-Plore PAS
• Approved as breathing connection for blower systems
• Mask body made of EPDM
• Weight approx. 500 g
• The intelligent ventilation system with separate inner mask ensures that the lens does not fog up and guarantees a clear view.
• Large field of vision. The distortion-free PMMA lens made of Plexiglas with 180° wide angle guarantees a large field of vision with wide all-round visibility.

Approved standards:
EN 136 Class 2
EN 12942 protection class TM3 P R SL
EN 14594

Dräger Vollmaske Panorama Nova

Dräger full face mask X-Plore 6530

Dräger X-plore 6530 is the high-performance full-face respirator for professional use in a wide variety of applications. It stands for the highest standards of quality, reliability, tight fit and wearing comfort to protect breathing and eyes. This full-face mask is the successor to the Panorama Nova masks, which have proven themselves worldwide for decades.

Easy to collect, maintain and manage. One universal size covers all sizes and makes logistics and inventory management easy. An inside barcode allows convenient recording and maintenance of mask inventory.

Secure and comfortable seal fit. A double sealing frame with triple sealing line provides secure protection and a tight fit for virtually all face shapes. Rugged EPDM mask body ensures comfort even during extended use.

• Mask body made of EPDM
• Polycarbonate visor
• Weight approx. 550 g
• Use with round thread filter
• Use with blower X-Plore 8000 and compressed air unit X-Plore PAS

Approved standards:
EN 136 Class 3
EN 12942 Protection class TM3 P R SL
EN 14594

Dräger full face mask X-Plore 6570

Dräger X-plore 6570 is the high-performance full-face respirator for professional use in a wide range of applications. It stands for the highest standards of quality, reliability, tight fit and wearing comfort for respiratory and eye protection.

Stainless steel speaking diaphragm for clear speech communication. An integrated stainless steel speaking diaphragm enables good communication.

Wide field of view: 180° viewing lens (PC). The distortion-free viewing screen with 180° wide angle guarantees a large field of view with wide all-round visibility. It is made of impact-resistant polycarbonate (optionally with plastic frame or extra-sturdy stainless steel frame).

Secure and comfortable fit. A double sealing frame with triple sealing line provides secure protection and a tight fit for virtually all face shapes. The mask body made of robust and skin-friendly silicone stands for uncompromising wearing comfort – even during longer uses

• Silicone mask body
• Weight approx. 550 g
• Polycarbonate visor
• Use with round thread filter
• Use with blower X-Plore 8000 and compressed air unit X-Plore PAS

Approved standards:
EN 136 Class 3
EN 12942 Protection class TM3 P R SL
EN 14594

Vollmaske Dräger X-Plore FPS 7000

Dräger full face mask FPS 7000

The Dräger FPS® 7000 full-face respirator series sets new standards in safety and comfort. With its proven design and various sizes, it offers a large, optimized field of vision and a comfortable as well as absolutely tight fit.

Maintenance
The easy maintenance of all mask parts makes the Dräger FPS 7000 RP not only very economical and service-friendly, but also flexible and versatile.

Integrated accessories
Optionally upgradeable with communication unit integrated into the design

Field of vision and mask body
With the Dräger FPS 7000 RP full-face respirator, you can keep an overview even in difficult situations. A large field of view gives you a wide angle of vision through the distortion-free polycarbonate lens. A double sealing frame with triple sealing line provides secure protection and a tight fit for almost all face shapes.

• Mask body made of EPDM
• Polycarbonate visor
• Weight approx. 600 g
• Use with round thread filter
• Use with blower X-Plore 8000 and compressed air unit PAS X-Plore

Approved standards:
EN 136 Class 3
EN 12942 Protection class TM3 P R SL
EN 145943 / 14594

Dräger full face mask Panorama Nova

Safety
The mask is equipped with a double sealing line for maximum safety, which perfectly adapts to different head and face shapes

Possible applications
Selectable with the various connection options, the Panorama Nova can be used as a normal or positive pressure mask for filters, jackhammers, airline systems or even closed-circuit systems in firefighting, mining or even industry.

Robustness and durability
Over the decades, the mask has proven itself in all extreme and harsh conditions of the different target or user groups (industry fire department and mining) by withstanding the most diverse impacts.

System integration
Due to the possibility to choose the mask with different connection options, but also wearing systems in the form of straps or helmet adapters, the mask is optimally integrated into the overall system consisting of helmet, mask and respiratory protection system (jackhammer, rebreather or filter).

• Safety during use
• Double seal
• Panoramic viewing window
• Extremely versatile
• Highly durable
• Easy maintenance for long durability

Scott full face mask Vision

The Vision2 full face mask offers maximum comfort and is very popular with wearers, especially because this mask is suitable for a wide range of applications.

The visor of the Vision2 full face mask features a virtually unrestricted visor size with its 98% field of view. It curves over both the vertical and horizontal surfaces; however, there is of course no distortion of the field of view.

The filters are mounted low and close to the face, providing excellent balance and weight distribution. The mask body is made of liquid silicone (LSR), which is a silicone rubber that combines the comfortable wearing properties and suppleness of silicone with durability and a long service life. All these properties result in exceptional wearing comfort and thus maximum acceptance by users.

• Unrestricted field of vision
• Silicone mask body also for sensitive skin
• Optimal weight distribution
• Three different sizes
• Choice of side or front filter connection
• Hard-coated, solvent-resistant and scratch-resistant visor
• No fogging or reflection of the visor
• Wide range of filters
• Approved as breathing connection for blower systems

Other models and brands are available from us on request.

We create solutions.

As an experienced partner in the field of occupational health and safety and sound know-how, we offer you sustainable and perfectly fitting solutions, individually tailored to your requirements.

Do you have a problem or a task for us? Do you need comprehensive advice on occupational health and safety? Then we should talk about it as soon as possible.